Assembly of connecting links CATALOG NUMBER 360

	Place the bushing on a plain surface. The internal bigger diameter must be upward
	Insert the spring
	Push thoroughly the spring inside the bushing with a thumb. The spring must be completely inserted in the bushing. Use a hammer if the spring doesn't slid in
	Fit the half couplings in the devices to be connected. The two halves must match as shown in the picture
	Place the bushing with the spring in the middle of the two half couplings. Drive the stud through the assembled links and push thoroughly until the stud stops
	Hammer until the end of the stud is flush with the outside of the coupling